- Used as perimeter isolation strip for resilient flooring
- Made of polyethylene foam
- Ships in rolls of 6mm or 12mm thicknesses
- Lead Time: 2-7 days
The GenieMat® PMI is a polyethylene foam sheet used to create a flexible break between the wall perimeter and resilient underlayment with finish floors. This material is to be attached at the base along the perimeter walls before installing the resilient underlayment. GenieMat® PMI is also bacteria, fungi, and water resistant.
GenieMat® PMI06PF is most often used in GenieMat® RST installations. GenieMat® PMI12PF is most often used in GenieMat® FF and GenieMat® FF Modular installations.
|GenieMat® PMI Sizes|
|GenieMat® PMI06PF||3"||50'||1/4" (6mm)||2 pounds|
|GenieMat® PMI12PF||6"||50'||1/2" (12mm)||7 pounds|
Along the perimeter walls of the entire sub-floor, temporarily fasten the GenieMat® PMI in place with masking tape, duct tape, carpet tape, or spot gluing. GenieMat® PMI will later be trimmed flush with the finish layer of flooring installed over the resilient underlayment.